SECOND HAND COMPLETE DILO DILO NONWOVEN NEEDLE PUNCHING P

Description :

Secondhand used - unused ,reconditioned for sale ,resale ,Auction ,liquidation Available Complete DILO DILO Gmbh Non Woven Needle Punched Plant  5 METER in good condition Late 1990s renewed 2010..,

coming from an AUTOMOTIVE application based factory making Velour Fabrics & others in GSM range 200-600 ….

 

Scope of Supply & Tech Details :

FIBRE BLENDING

Temafa 25m Conveyor (fits 8 bales end to end)

Temafa Single pin sheet blending hopper with Volumetric feed

Temafa Fearnaught Fibre opening, Type RD02

Oiling,Temafa Metal detection Fan

Feed to either:

Temafa Mix master blending bin with conveyor floor (approx. 20m x 4m) – Type MM20 / 2

Or Temafa Small Blending bin (5m x 5m)

Or 2 x Temafa blending bins each approx. 2500kgs with single bin Temafa emptier

Temafa fabric condenser and feed tower (10m high),Trutzschler FD-S fine fibre opening (2005)

CARDING

Trutzschler volumetric card hopper feed

2.5m FOR multi-cylinder nonwoven card with double doffer ,

Production rate up to 500kgs per hour

Card uses a Serel servolap system to control the web weight pre card.

CROSS LAPPER

Autefa Cross Lapper (Type 190 73) with 2.5m inlet and 5.0m max lay width (1999)

There is a PROFILE attachment..

NEEDLEPUNCH

Sound proof cabinet

5.0M DILO PRE NEEDLE (Type CBF T 50, 1999,)

(Input web compression sheets with finger system)

5.0M DILO NEEDLE LOOM:

Type DI-LOOM UD-Li S 50 (1999)

Stroke: UP ,Twin Board ,Total Needles 90000

Needle Density: 1800 needles /m ,Max Gap:    mm ,Max needled width: 5.0m

RPM: 1500 (Max) ,5.0M DILO NEEDLE LOOM:

Type DI-LOOM UD-II i S 50 (1999,) ,Stroke: DOWN ,Twin Board

Total Needles 90000 ,Needle Density: 1800 needles /m ,Max Gap:  mm ,Max needled width: 5.0m ,RPM: 1500 (Max)

5.0M DILO NEEDLE LOOM 3 (DILOUR):

Type DI-LOUR-II SXBG 50 (1999,)

Stroke: DOWN ,Twin Board ,Total Needles 160000 ,Needle Density: 3200 needles /m

Fork needles ,Brush conveyor

Max Gap:    mm ,Max needled width: 5.0m ,RPM: 1900 (Max)

FINISHING

Menzel J Box ,Menzel Overhead gantry ,Menzel 5m metal detection

Sellers 5m cropping/shearing + 12 bag fibre/lint collection (2008) (not been used for several years)

4 head edge and centre fabric slitting

Edge trim - Hepp-Schwamborn (Germany) – Edge shredding with fan